Kodak Disk Drive Analyzer
1. Boot to DOS (hard drive, or DOS boot floppy).
2. Put the Kodak Disk Drive Analyzer floppy into the drive-under-test.
3. In DOS, change to the drive-under-test, then execute the KDK.COM program found on the Kodak floppy.
4. The screens shown below will be displayed as the program tests the drive-under-test.
Obviously, the drive-under-test must be functional enough (including reasonable alignment) to read the program on the Kodak floppy.
Note: Just like an alignment floppy, this Kodak floppy is specially created and cannot be copied.
